China Hot selling CHINAMFG Customized Jaw Shaft Coupling, Spline Shaft Coupling, Jaw Coupling for Plunger Pump spline coupling

Product Description

Densen Customized Jaw shaft Coupling, Spline Shaft Coupling, Jaw coupling for plunger pump

 

Product Name Densen Customized Jaw shaft Coupling, Spline Shaft Coupling, Jaw coupling for plunger pump
DN mm 16~190mm
Rated Torque 40~25000 N·m
Allowable speed 4500~200 kN·m
Material 45#steel
Application Widely used in metallurgy, mining, engineering and other fields.

 

Product show

Company Information

Equipment

 

Application Case

Typical case of diaphragm coupling applied to variable frequency speed control equipment

JMB type coupling is applied to HangZhou Oilfield Thermal Power Plant

According to the requirements of HangZhou Electric Power Corporation, HangZhou Oilfield Thermal Power Plant should dynamically adjust the power generation according to the load of the power grid and market demand, and carry out the transformation of the frequency converter and the suction fan. The motor was originally a 1600KW, 730RPM non-frequency variable speed motor matched by HangZhou Motor Factory. The speed control mode after changing the frequency is manual control. Press the button speed to increase 10RPM or drop 10RPM. The coupling is still the original elastic decoupling coupling, and the elastic de-coupling coupling after frequency conversion is frequently damaged, which directly affects the normal power generation.

It is found through analysis that in the process of frequency conversion speed regulation, the pin of the coupling can not bear the inertia of the speed regulation process (the diameter of the fan impeller is 3.3 meters) and is cut off, which has great damage to the motor and the fan.

Later, they switched to the JMB460 double-diaphragm wheel-type coupling of our factory (patent number: ZL.99246247.9). After 1 hour of destructive experiment and more than 1 year of operation test, the equipment is running very well, and there is no Replace the diaphragm. 12 units have been rebuilt and the operation is in good condition.

 

Other Application Case

 

Spare parts

 

Packaging & Shipping

 

Contact us

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

spline coupling

What are the best practices for installing a mechanical coupling correctly?

Proper installation of a mechanical coupling is essential to ensure its optimal performance and prevent premature failure. Follow these best practices when installing a mechanical coupling:

1. Clean the Shaft Ends:

Before installation, ensure that the shaft ends are clean and free from dirt, debris, and any old coupling remnants. Clean the shafts using a suitable solvent if necessary.

2. Verify Shaft and Bore Dimensions:

Check the dimensions of the shaft and bore to ensure they match the coupling’s specifications. Ensure that the shaft and bore diameters, keyway sizes, and lengths are correct for the specific coupling.

3. Lubricate Contact Surfaces:

Apply a thin layer of appropriate lubricant to the contact surfaces of the shaft and coupling bore. This helps in easy installation and minimizes the risk of galling or damage during assembly.

4. Align Shaft and Coupling:

Align the shafts and coupling properly before installing. Avoid forcing the coupling onto the shaft; it should slide smoothly into position.

5. Use Proper Installation Tools:

Use the recommended installation tools or methods provided by the coupling manufacturer. Using improper tools may lead to damage or misalignment of the coupling.

6. Tighten Fasteners Gradually and Evenly:

If the coupling uses set screws, bolts, or any fasteners, tighten them gradually and evenly in a criss-cross pattern. This ensures uniform distribution of pressure and prevents distortion.

7. Check for Proper Keyway Fit:

If the coupling utilizes keyways, ensure that the keys fit snugly into both the shaft and the coupling keyway to prevent movement or slippage.

8. Verify Proper Torque:

If the coupling requires a specific torque value for installation, use a torque wrench to achieve the correct tightening. Avoid over-torquing as it may damage the coupling or cause premature wear.

9. Inspect for Runout and Alignment:

After installation, inspect the coupling for runout and alignment. Verify that the shafts are concentric and parallel, as misalignment can lead to premature coupling failure.

10. Conduct Regular Inspections:

Perform regular inspections and maintenance of the coupling during its operational life. Check for signs of wear, misalignment, or damage and address any issues promptly.

Adhering to these best practices ensures that the mechanical coupling is installed correctly and operates as intended. Proper installation increases the coupling’s longevity, minimizes the risk of downtime, and contributes to the overall efficiency and reliability of the mechanical system.

“`spline coupling

Explaining the impact of mechanical coupling wear on system efficiency.

Mechanical coupling wear can have a significant impact on the efficiency and performance of a mechanical system. As couplings wear over time, several factors come into play that affect the overall efficiency of the system:

1. Loss of Torque Transmission:

As couplings wear, they may develop gaps or play between the mating components. This can result in a loss of torque transmission between the connected shafts. Reduced torque transmission leads to diminished power transfer and can result in inadequate performance of the system, especially in high-torque applications.

2. Misalignment Issues:

Worn couplings may not effectively compensate for misalignments between the connected shafts. Misalignment can cause additional stress on bearings, gears, and other components, leading to increased wear and reduced system efficiency. It can also result in increased vibration and noise, further impacting the system’s performance.

3. Vibration and Resonance:

Wear in flexible couplings can lead to increased vibration and resonance within the system. Excessive vibrations can cause premature failure of components and reduce the overall system efficiency. Vibrations can also create a safety hazard for operators and equipment.

4. Energy Losses:

Worn couplings may introduce energy losses due to friction and slippage. These losses decrease the overall efficiency of the system and result in additional energy consumption to achieve the desired output.

5. Increased Maintenance Costs:

As couplings wear, they may require more frequent maintenance and replacement. The increased downtime for maintenance and the cost of replacing worn couplings can impact the system’s productivity and increase operational expenses.

6. Reduced System Reliability:

Worn couplings are more prone to sudden failures, leading to unplanned downtime. Unreliable systems can disrupt production schedules, affect product quality, and result in lost revenue.

7. Safety Concerns:

Worn couplings can compromise the safety of personnel and equipment. They may lead to unexpected failures, flying debris, or even catastrophic accidents in severe cases.

8. Impact on Product Quality:

In certain industries, like precision manufacturing or aerospace, system efficiency directly affects product quality. Worn couplings can cause inaccuracies, leading to subpar products and potential rework or rejection.

To maintain optimal system efficiency and prevent these issues, it is crucial to perform regular inspections and maintenance of mechanical couplings. Timely replacement of worn couplings and adherence to manufacturer’s guidelines for installation and maintenance can significantly contribute to the overall efficiency, reliability, and safety of the mechanical system.

“`spline coupling

Types of mechanical couplings and their specific uses in various industries.

Mechanical couplings come in various types, each designed to meet specific needs in different industries. Here are some common types of mechanical couplings and their specific uses:

1. Flexible Couplings:

Flexible couplings are versatile and widely used in industries such as:

  • Industrial Machinery: Flexible couplings are used in pumps, compressors, fans, and other rotating equipment to transmit torque and absorb vibrations.
  • Automotive: Flexible couplings are used in automotive powertrain systems to connect the engine to the transmission and accommodate engine vibrations.
  • Railway: Flexible couplings are employed in railway systems to connect the diesel engine to the generator or alternator and accommodate dynamic forces during train movement.

2. Rigid Couplings:

Rigid couplings are mainly used in applications that require precise alignment and high torque transmission, such as:

  • Mechanical Drives: Rigid couplings are used in gearboxes, chain drives, and belt drives to connect shafts and maintain accurate alignment.
  • Pumps and Compressors: Rigid couplings are used in heavy-duty pumps and compressors to handle high torque loads.
  • Machine Tools: Rigid couplings are employed in machine tool spindles to ensure precise rotational motion.

3. Gear Couplings:

Gear couplings are suitable for high-torque applications and are commonly found in industries such as:

  • Steel and Metal Processing: Gear couplings are used in rolling mills, steel mills, and metal processing machinery to transmit high torque while accommodating misalignment.
  • Mining: Gear couplings are employed in mining equipment to handle heavy loads and transmit torque in harsh conditions.
  • Crushers and Conveyors: Gear couplings are used in material handling systems to drive crushers, conveyors, and other equipment.

4. Disc Couplings:

Disc couplings are used in various industries due to their high torsional stiffness and ability to handle misalignment. Some applications include:

  • Gas Turbines: Disc couplings are used in gas turbine power generation systems to transmit torque from the turbine to the generator.
  • Petrochemical: Disc couplings are employed in pumps, compressors, and agitators used in the petrochemical industry.
  • Marine: Disc couplings are used in marine propulsion systems to connect the engine to the propeller shaft.

5. Universal Couplings (Hooke’s Joints):

Universal couplings find applications in industries where angular misalignment is common, such as:

  • Aerospace: Universal couplings are used in aircraft control systems to transmit torque between flight control surfaces.
  • Automotive: Universal couplings are employed in steering systems to allow for angular movement of the wheels.
  • Shipbuilding: Universal couplings are used in marine propulsion systems to accommodate misalignment between the engine and propeller shaft.

These examples demonstrate how different types of mechanical couplings are employed across various industries to facilitate torque transmission, accommodate misalignment, and ensure efficient and reliable operation of different mechanical systems.

“`
China Hot selling CHINAMFG Customized Jaw Shaft Coupling, Spline Shaft Coupling, Jaw Coupling for Plunger Pump   spline couplingChina Hot selling CHINAMFG Customized Jaw Shaft Coupling, Spline Shaft Coupling, Jaw Coupling for Plunger Pump   spline coupling
editor by CX 2024-05-09