Product Description
Densen Customized Jaw shaft Coupling, Spline Shaft Coupling, Jaw coupling for plunger pump
| Product Name | Densen Customized Jaw shaft Coupling, Spline Shaft Coupling, Jaw coupling for plunger pump |
| DN mm | 16~190mm |
| Rated Torque | 40~25000 N·m |
| Allowable speed | 4500~200 kN·m |
| Material | 45#steel |
| Application | Widely used in metallurgy, mining, engineering and other fields. |
Product show
Company Information
Equipment
Application Case
Typical case of diaphragm coupling applied to variable frequency speed control equipment
JMB type coupling is applied to HangZhou Oilfield Thermal Power Plant
According to the requirements of HangZhou Electric Power Corporation, HangZhou Oilfield Thermal Power Plant should dynamically adjust the power generation according to the load of the power grid and market demand, and carry out the transformation of the frequency converter and the suction fan. The motor was originally a 1600KW, 730RPM non-frequency variable speed motor matched by HangZhou Motor Factory. The speed control mode after changing the frequency is manual control. Press the button speed to increase 10RPM or drop 10RPM. The coupling is still the original elastic decoupling coupling, and the elastic de-coupling coupling after frequency conversion is frequently damaged, which directly affects the normal power generation.
It is found through analysis that in the process of frequency conversion speed regulation, the pin of the coupling can not bear the inertia of the speed regulation process (the diameter of the fan impeller is 3.3 meters) and is cut off, which has great damage to the motor and the fan.
Later, they switched to the JMB460 double-diaphragm wheel-type coupling of our factory (patent number: ZL.99246247.9). After 1 hour of destructive experiment and more than 1 year of operation test, the equipment is running very well, and there is no Replace the diaphragm. 12 units have been rebuilt and the operation is in good condition.
Other Application Case
Spare parts
Packaging & Shipping
Contact us
How to identify the most suitable mechanical coupling for a specific application?
Choosing the right mechanical coupling for a specific application requires careful consideration of various factors. Here are the steps to help identify the most suitable coupling:
1. Understand Application Requirements:
Begin by thoroughly understanding the requirements of the application. Consider factors such as torque and speed requirements, misalignment allowances, space constraints, environmental conditions, and any specific industry standards.
2. Evaluate Shaft Misalignment:
Determine the type and amount of misalignment expected between the connected shafts. If significant misalignment is anticipated, flexible couplings may be more appropriate.
3. Consider Torque and Power Transmission:
Calculate the torque and power that the coupling will need to transmit between the shafts. Ensure that the selected coupling can handle the expected load without exceeding its rated capacity.
4. Assess Operating Speed:
Take into account the operating speed of the system. High-speed applications may require couplings designed for high rotational speeds to avoid issues like resonance.
5. Evaluate Environmental Factors:
Consider the environmental conditions in which the coupling will operate. For example, corrosive or harsh environments may require couplings made from specific materials like stainless steel.
6. Review Space Limitations:
Examine the available space for installing the coupling. In some cases, compact couplings may be necessary to fit within confined spaces.
7. Analyze Misalignment Compensation:
For applications where precise alignment is challenging, choose couplings that offer misalignment compensation, such as flexible couplings or universal couplings (Hooke’s joints).
8. Consider Vibration Damping:
If the application involves vibrations or shock loads, consider couplings with vibration damping properties, like certain types of flexible couplings.
9. Account for Maintenance Requirements:
Factor in the maintenance needs of the coupling. Some couplings may require periodic inspections and replacement of components, while others are relatively maintenance-free.
10. Seek Expert Advice:
If unsure about the most suitable coupling for the application, consult with coupling manufacturers or engineering experts who can provide guidance based on their expertise and experience.
By systematically evaluating these factors and requirements, engineers and designers can narrow down the options and select the most appropriate mechanical coupling that will ensure reliable and efficient operation in the specific application.
“`
Real-world examples of mechanical coupling applications in different industries.
Mechanical couplings play a vital role in numerous industries, connecting shafts and transmitting torque between various mechanical components. Here are some real-world examples of mechanical coupling applications in different industries:
1. Manufacturing Industry:
In manufacturing plants, mechanical couplings are used in conveyor systems to connect motors to rollers or pulleys, enabling the movement of materials along assembly lines. They are also found in machine tools, such as lathes and milling machines, to transmit torque from the motor to the cutting tools.
2. Automotive Industry:
In the automotive sector, mechanical couplings are used in the powertrain to connect the engine to the transmission and wheels. They enable the transmission of torque from the engine to the wheels, allowing the vehicle to move. Couplings like universal joints (U-joints) are used in the drive shaft to accommodate the misalignment between the engine and the rear axle.
3. Aerospace Industry:
In the aerospace industry, mechanical couplings are used in aircraft engines to transmit torque from the turbine to the propellers or fans. They are also found in flight control systems to connect the pilot’s controls to the aircraft’s control surfaces, allowing for precise maneuvering.
4. Marine Industry:
In ships and boats, mechanical couplings are used in propulsion systems to connect the engine to the propeller shaft. They are also found in steering systems to connect the steering wheel to the rudder, enabling navigation and control of the vessel.
5. Oil and Gas Industry:
In the oil and gas sector, mechanical couplings are used in pumps and compressors to connect the electric motor or engine to the rotating shaft, facilitating the pumping or compression of fluids and gases. They are also used in drilling equipment to transmit torque from the drilling motor to the drill bit.
6. Mining Industry:
In mining operations, mechanical couplings are used in conveyors to transport mined materials, connecting motors to conveyor belts. They are also used in crushers and grinding mills to transmit torque from the motors to the crushing or grinding equipment.
7. Renewable Energy Industry:
In renewable energy applications, mechanical couplings are used in wind turbines to connect the rotor blades to the main shaft, enabling the conversion of wind energy into electricity. They are also used in hydroelectric power plants to connect the turbines to the generators.
8. Construction Industry:
In construction equipment, mechanical couplings are used in excavators, bulldozers, and other machinery to transmit torque from the engine to the hydraulic pumps and other working components.
These are just a few examples of how mechanical couplings are used across various industries to ensure efficient power transmission and smooth operation of a wide range of mechanical systems and equipment.
“`
What is a mechanical coupling and its significance in engineering applications?
A mechanical coupling is a device used to connect two rotating shafts or components in a mechanical system to transmit torque and motion between them. It plays a crucial role in various engineering applications by providing a reliable and efficient means of power transmission. The significance of mechanical couplings in engineering applications can be understood through the following points:
1. Torque Transmission:
One of the primary functions of a mechanical coupling is to transmit torque from one shaft to another. This allows for the transfer of power between different components of a machine or system.
2. Misalignment Compensation:
Mechanical couplings can accommodate certain degrees of misalignment between connected shafts. This is crucial in real-world applications where perfect alignment may not always be achievable or maintained due to various factors.
3. Vibration Damping:
Some mechanical couplings, especially flexible couplings, help dampen vibrations caused by imbalances or load fluctuations. This feature prevents excessive wear on components and improves the overall stability and performance of the system.
4. Shock Absorption:
In systems subject to sudden shocks or impacts, mechanical couplings with certain flexibility can absorb and dissipate the energy, protecting the connected equipment from damage.
5. Load Distribution:
By connecting two shafts, a mechanical coupling can evenly distribute the load between them. This ensures that both shafts share the torque and forces, preventing premature wear on a single shaft.
6. Versatility:
Mechanical couplings come in various types and designs, each tailored to specific applications. This versatility allows engineers to choose the most suitable coupling based on factors such as load requirements, speed, misalignment tolerance, and environmental conditions.
7. Maintenance and Repair:
In engineering applications, mechanical couplings are generally modular and easy to replace, simplifying maintenance and repair tasks. This helps reduce downtime and improves the overall efficiency of the system.
8. Reducing Overload:
In scenarios where the connected components experience overload or excessive torque, certain types of mechanical couplings can act as a safety feature by slipping or disengaging before damage occurs, protecting the system from catastrophic failure.
Overall, mechanical couplings are essential components in various engineering applications, including industrial machinery, automotive systems, power transmission, robotics, and many others. Their ability to reliably connect rotating shafts, transmit torque, and compensate for misalignment contributes significantly to the smooth and efficient operation of mechanical systems.
“`
editor by CX 2023-10-08