Product Description
Densen Customized Jaw shaft Coupling, Spline Shaft Coupling, Jaw coupling for plunger pump
| Product Name | Densen Customized Jaw shaft Coupling, Spline Shaft Coupling, Jaw coupling for plunger pump |
| DN mm | 16~190mm |
| Rated Torque | 40~25000 N·m |
| Allowable speed | 4500~200 kN·m |
| Material | 45#steel |
| Application | Widely used in metallurgy, mining, engineering and other fields. |
Product show
Company Information
Equipment
Application Case
Typical case of diaphragm coupling applied to variable frequency speed control equipment
JMB type coupling is applied to HangZhou Oilfield Thermal Power Plant
According to the requirements of HangZhou Electric Power Corporation, HangZhou Oilfield Thermal Power Plant should dynamically adjust the power generation according to the load of the power grid and market demand, and carry out the transformation of the frequency converter and the suction fan. The motor was originally a 1600KW, 730RPM non-frequency variable speed motor matched by HangZhou Motor Factory. The speed control mode after changing the frequency is manual control. Press the button speed to increase 10RPM or drop 10RPM. The coupling is still the original elastic decoupling coupling, and the elastic de-coupling coupling after frequency conversion is frequently damaged, which directly affects the normal power generation.
It is found through analysis that in the process of frequency conversion speed regulation, the pin of the coupling can not bear the inertia of the speed regulation process (the diameter of the fan impeller is 3.3 meters) and is cut off, which has great damage to the motor and the fan.
Later, they switched to the JMB460 double-diaphragm wheel-type coupling of our factory (patent number: ZL.99246247.9). After 1 hour of destructive experiment and more than 1 year of operation test, the equipment is running very well, and there is no Replace the diaphragm. 12 units have been rebuilt and the operation is in good condition.
Other Application Case
Spare parts
Packaging & Shipping
Contact us
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Exploring the various materials used in manufacturing mechanical couplings.
Mechanical couplings are manufactured using a wide range of materials, each chosen based on specific application requirements. The choice of material impacts the coupling’s performance, durability, and suitability for different operating conditions. Here are some common materials used in manufacturing mechanical couplings:
1. Steel:
Steel is one of the most widely used materials for mechanical couplings due to its strength, durability, and cost-effectiveness. It is suitable for various applications, including high-torque and high-speed requirements. Stainless steel is often preferred for couplings in corrosive environments.
2. Aluminum:
Aluminum is known for its lightweight properties, making it suitable for applications where reducing weight is essential, such as in aerospace and automotive industries. However, aluminum couplings may have lower torque capacities compared to steel couplings.
3. Cast Iron:
Cast iron is used in couplings requiring high strength and wear resistance. It is commonly used in industrial machinery and heavy-duty applications.
4. Bronze:
Bronze is chosen for its excellent resistance to corrosion and its ability to handle high shock loads. Bronze couplings are often used in marine and hydraulics applications.
5. Brass:
Brass is used in couplings where electrical conductivity is required, such as in some electrical motor couplings.
6. Rubber and Elastomers:
Rubber and elastomers are used in flexible couplings to provide flexibility and vibration damping. They can absorb shocks and compensate for misalignments in various applications.
7. Polyurethane:
Polyurethane is commonly used in elastomeric couplings due to its excellent resilience, toughness, and resistance to wear.
8. Thermoplastics:
Thermoplastics like nylon and polyethylene are used in lightweight couplings with low torque requirements. They are known for their low friction and self-lubricating properties.
9. Composite Materials:
Composite materials, such as carbon fiber-reinforced polymers, are used in high-performance couplings where a balance of strength and weight is crucial.
10. Ceramic:
Ceramic couplings are used in extreme temperature and high-speed applications due to their excellent thermal and wear resistance properties.
The choice of material for a mechanical coupling depends on factors like the application’s operating conditions, load requirements, environmental factors, and cost considerations. Selecting the right material ensures that the coupling can perform reliably and efficiently in its intended application.
“`
How to troubleshoot common issues with mechanical couplings and their solutions?
Mechanical couplings may experience various issues during their operational life. Identifying and troubleshooting these issues promptly is essential to ensure the optimal performance and reliability of the mechanical system. Here are some common coupling problems and their solutions:
1. Misalignment:
Issue: Misalignment between the connected shafts can lead to premature wear, vibration, and reduced efficiency.
Solution: Check and adjust the alignment of the shafts. Properly align the coupling using shims or adjustable couplings to eliminate misalignment. Regularly inspect and correct any misalignment to avoid further issues.
2. Excessive Vibration:
Issue: Excessive vibration can result from misalignment, worn components, or resonance within the system.
Solution: Inspect the coupling for signs of wear, corrosion, or misalignment. Replace worn or damaged components and ensure proper alignment. If resonance is causing vibrations, consider dampening solutions or changing the coupling type to one better suited to the application.
3. Overheating:
Issue: Overheating of the coupling may occur due to excessive friction or inadequate lubrication.
Solution: Check the coupling for proper lubrication and use the recommended lubricant as per the manufacturer’s guidelines. Ensure that the coupling is not overloaded, as excessive torque can lead to overheating. Reduce the load or choose a higher torque-rated coupling if necessary.
4. Backlash:
Issue: Backlash, also known as play or free movement between the coupling components, can affect precision and accuracy in certain applications.
Solution: For applications requiring minimal backlash, choose couplings with low or zero backlash characteristics, such as gear couplings or servo couplings. Regularly inspect and replace worn or damaged components that may contribute to increased backlash.
5. Noise:
Issue: Unusual noises, such as clanking or rattling, may indicate misalignment, worn components, or improper installation.
Solution: Conduct a thorough inspection of the coupling and associated components. Correct any misalignment, replace worn parts, and verify proper installation. Ensure that all fasteners are properly tightened.
6. Premature Wear:
Issue: Premature wear of coupling components can lead to reduced coupling life and system reliability.
Solution: Regularly inspect the coupling for signs of wear and damage. Implement a preventive maintenance program with scheduled inspections and lubrication. Follow the manufacturer’s guidelines for maintenance and installation to maximize the coupling’s lifespan.
By promptly addressing these common issues and implementing appropriate solutions, the mechanical system can operate smoothly, efficiently, and reliably with minimal downtime and maintenance requirements.
“`
What is a mechanical coupling and its significance in engineering applications?
A mechanical coupling is a device used to connect two rotating shafts or components in a mechanical system to transmit torque and motion between them. It plays a crucial role in various engineering applications by providing a reliable and efficient means of power transmission. The significance of mechanical couplings in engineering applications can be understood through the following points:
1. Torque Transmission:
One of the primary functions of a mechanical coupling is to transmit torque from one shaft to another. This allows for the transfer of power between different components of a machine or system.
2. Misalignment Compensation:
Mechanical couplings can accommodate certain degrees of misalignment between connected shafts. This is crucial in real-world applications where perfect alignment may not always be achievable or maintained due to various factors.
3. Vibration Damping:
Some mechanical couplings, especially flexible couplings, help dampen vibrations caused by imbalances or load fluctuations. This feature prevents excessive wear on components and improves the overall stability and performance of the system.
4. Shock Absorption:
In systems subject to sudden shocks or impacts, mechanical couplings with certain flexibility can absorb and dissipate the energy, protecting the connected equipment from damage.
5. Load Distribution:
By connecting two shafts, a mechanical coupling can evenly distribute the load between them. This ensures that both shafts share the torque and forces, preventing premature wear on a single shaft.
6. Versatility:
Mechanical couplings come in various types and designs, each tailored to specific applications. This versatility allows engineers to choose the most suitable coupling based on factors such as load requirements, speed, misalignment tolerance, and environmental conditions.
7. Maintenance and Repair:
In engineering applications, mechanical couplings are generally modular and easy to replace, simplifying maintenance and repair tasks. This helps reduce downtime and improves the overall efficiency of the system.
8. Reducing Overload:
In scenarios where the connected components experience overload or excessive torque, certain types of mechanical couplings can act as a safety feature by slipping or disengaging before damage occurs, protecting the system from catastrophic failure.
Overall, mechanical couplings are essential components in various engineering applications, including industrial machinery, automotive systems, power transmission, robotics, and many others. Their ability to reliably connect rotating shafts, transmit torque, and compensate for misalignment contributes significantly to the smooth and efficient operation of mechanical systems.
“`
editor by CX 2024-03-11